What Car Battery Should You Choose? Absorbed Glass Mat (AGM), Gel Or Wet Cell

An electrical problem that doesn’t let your car start and leaves you stuck in a parking lot or some place away from the fix that’s needed is an unwanted problem we all do our best to avoid. So what can you do to lessen the possibility of a possible unwanted situation that involves an electrical system crash in your vehicle?

First of all make sure you spend double the money on a good car battery. A lead acid battery can cost between $75 to $125 dollars. The only reason liquid lead acid batteries are the most commonplace is liquid lead acid batteries were first developed in 1859 and they are the least expensive in today’s world of automotive engine starting sources. In 1971 the sealed liquid lead acid battery was created that made it maintenance friendly.

VRLA (valve regulated lead acid) batteries include gel and absorbed glass mate which are not liquid. Gel batteries are as the name applies which is a “Gel”. AGM batteries are silicate glass fibers mixed with boron and formed into a mat that holds the electrolyte. Non liquid gel batteries were created in the late 1920’s and lead to the creation of the “Absorbed Glass Mat” batteries in 1957. The AGM (absorbed glass mat) battery was put into production in 1972 but mostly used for military applications and non vehicle applications like boats, motor homes, motorcycles and electronics. Nowadays you see more AGM batteries becoming available for use in production cars. AGM (absorbed glass mat) batteries can cost from $160 to $250 but have more advantages over liquid lead acid batteries.

AGM batteries are basically used in applications where the use of the vehicle is only used now and again as in boats and recreational vehicles. The non use discharge rate is much lower in non use applications than liquid lead acid batteries. The charge rate is much faster also. Some automotive manufacturers are installing AGM batteries as their standard new car power source because of today’s higher vehicle power consumption. BMW right now is known to be the first to install AGM batteries in their 2007 models because of computer functions and braking.

AGM batteries are much better than liquid lead acid batteries but the downside of AGM batteries is you don’t overcharge them. They will charge faster with a normal output alternator up to 14.5 volts and a high output alternator is not needed. When an AGM battery is used in a non use vehicle a solar panel is recommended with a trickle charge. AGM batteries will go bad if charged over 14.5 volts. Most problems with charging AGM’s are in sports vehicles due to the rough environment they are used in. Toss away your old plug in garage battery charger and get a new one that maintains “Voltage” instead of amps. An AGM battery charger will sense a very low voltage in the battery and will start the recharge whereas an old charger does not sense low voltage and will not charge the battery.

These batteries are used in military vehicles that sit in storage for many years and start up after years in storage with no problem. I’ve read stories online where people have left their AGM batteries sitting in their garage for many years and they have retained their full charge. I use AGM batteries in my vehicles and disconnect the negative cable in the one that I don’t use that often anymore and it starts right up when I run the engine occasionally. I’ve read complaints about the AGM failing often but that’s only because of bad practices with them or using them in systems where the charging exceeds the recommended level. You can leave these batteries sitting for long periods of time without charging them but it’s recommended that a solar panel with an extremely low trickle charge be used when not in use. Again I will say from my own experiences is to disconnect the negative cable to the battery when not in use.

The AGM vs Gel and the wet cell? The AGM has thicker plates that tend to not warp that easily during deep discharges and resist sulfur buildup’s that destroy a wet cell battery. Wet cell batteries usually go bad after 4 years if they make it that length of time. The life expectancy of the AGM battery can be up to 10 years if not overcharged. Gel cell batteries are great for sports vehicles but tend to charge slower.

The Winner Is, “Absorbed Glass Mat” if you learn how to take care of them properly.

Posted in homepage | Comments Off on What Car Battery Should You Choose? Absorbed Glass Mat (AGM), Gel Or Wet Cell

Why You Should Stop Boasting About How Busy You Are

An Accomplished Life

“Hi Tom, how are you?”

“I’m well Jane, just extremely busy.”

“Oh, I’m glad to hear you’re keeping busy then.”

“Yes, I’m flat out at the moment.”

The above interaction is one that takes place between people on a daily basis.

But what is behind the busyness?

Is it a way to deflect attention from what really matters?

People brag about their busy lives to highlight themselves living an accomplished life to their peers.

Similarly, they may wish to communicate how meaningful their work is and so it becomes a self-fulfilling prophecy.

Being occupied implies oneself is consumed with matters of significance. That is why people state their busyness, to have you know they are important.

Busy people struggle to keep their attention in the present moment because their focus lies in future events and planning for the next project.

“We become active and busy, but this doesn’t actually move us any closer to success. Activity is often unrelated to productivity, and busyness rarely takes care of business,” states authors Gary Keller and Jay Papasan in, The One Thing: The Surprisingly Simple Truth Behind Extraordinary Results.

I question those who have a hectic schedule as a method to divert their attention from connecting with their core self.

The title quote by the Greek philosopher Socrates, invites you to be wary of a busy life which can be barren.

The busy person is disconnected from others, simply because their attention is focussed on their own commitments. There is the impression of a purposeless life, masked behind the facade of a frantic lifestyle.

Busyness can be reframed to imply your pursuits are purposeful instead of busy.

Gary Keller and Jay Papasan affirm, “Don’t focus on being busy; focus on being productive. Allow what matters most to drive your day.”

Busy or Just Unproductive?

You can be busy but not productive and still chase your tail.

Beneath the busyness lies the unconscious desire to be rewarded for hard work.

People believe being preoccupied is impressive and associated with status. You must be pursuing something prestigious, otherwise you wouldn’t be busy.

I’m reminded of an episode in the Seinfeld sitcom where the character George Costanza, played by Jason Alexander, walks around the office looking annoyed. He realises that being busy is associated with stress and works hard to uphold this facade.

He appears irritated, causing his supervisor; Mr. Wilhelm to fear George is cracking under the pressure of his work.

While this scenario is fictional, it shows how people unconsciously use busyness to draw attention to themselves.

Similarly, you may believe multitasking is indicative of productivity. Busyness implies being on top of things which is often the furthest thing from the truth.

“Productivity isn’t about being a workhorse, keeping busy or burning the midnight oil… It’s more about priorities, planning, and fiercely protecting your time,” affirms associate editor at Psych Central, Margarita Tartakovsky.

The busy pandemic comes at a cost to people’s well-being and happiness. You may find it difficult to disconnect from work to spend time with family. These are the pursuits that rejuvenate you instead of deplete you.

Busyness can be a sign of procrastination. It is a smoke screen to cover up being overwhelmed and in need of help to prioritise your life.

Consequently, those in the creative field will tell you they are absorbed in their interests and not busy with work.

It was the late Stephen R Covey, author of The 7 Habits of Highly Effective People who said, “It is possible to be busy-very busy-without being very effective.”

The Demands of a Hectic Schedule

It is vital that you set clear boundaries if you wish to be fulfilled. Busy people find it difficult to say no since they do not wish to offend others or be seen as incapable.

I’m yet to meet a busy person satisfied with their hectic schedule. I’m certain they would trade their frantic life for: less work, more time and money.

Occasionally, you might be pulled by circumstances not of your choosing. Business may unexpectedly increase if you’re self-employed as you try to meet the pressures of growing sales. But that doesn’t mean you are happy if all you are doing is working to provide for the demands of other people.

You have a choice how you spend your time. To claim you are busy is failing to prioritise your time wisely.

“Everybody’s busy. Everyone does the actions. But were they the right actions? Were those actions productive? Did you take a step forward? These are questions that most people never take the time to think about,” reminds us author Jeff Olson in, The Slight Edge.

After all, what is the point of being busy and stressed to the point of exhaustion that your health and relationships suffer, just to improve your bottom line?

Surely, there’s a more efficient way to work in the 21 century while enjoying more leisure time?

Busy people are prone to being overwhelmed if they continue to drive themselves hard. It is not healthy to run yourself into the ground and expect to stop at the drop of a hat.

Something must give. That may be as excessive drinking to help you wind down or toxic behaviours such as: compulsive eating, gambling or whatever distracts you from what is important.

We all have the same hours in the day and how you spend it is entirely up to you. Many people squander their time running around believing they are productive, when they are simply busy due to their lack of organisation and prioritisation.

“We are so busy being enticed by our next endeavour that we forget to savour what is already there and could be deeply meaningful. It is useful to remember the adage “The more things change, the more they remain the same” avows author Bernard Roth in, The Achievement Habit: Stop Wishing, Start Doing, and Take Command of Your Life.

A better way to reframe busyness is to state you are productive or engaged in what you are doing. Conversely, communicating you have taken on more than you can handle, is a step towards reclaiming your lost time.

This is not a cry for help, but exposing your vulnerability to those willing to help you better manage your time.

Find ways to be less busy and more engaged so you are in Flow, as the Hungarian psychology Professor, Mihaly Csikszentmihalyi espouses.

Busyness is a not indicative of a rewarding life if all you are doing is jumping from one task to the next.

Those who manage their time successfully hold on to it like it was their last breath. They prioritise what is important and so should you.

I invite you to think with the end in mind as Stephen R. Covey conveys in his teachings.

Only then will you appreciate what really matters and worth devoting your time and energy towards.

Posted in homepage | Comments Off on Why You Should Stop Boasting About How Busy You Are

Brainstorming To Start A Small Business – Questions To Answer

Hello readers and potential future entrepreneurs. I understand the feeling; desire to create, operate, and succeed. Throughout my professional career, I have learned that there are numerous steps that must be taken in order to organize opening and operating a small business. I have put together a few questions which aspiring entrepreneurs should, at the very least, consider reading over. There are many questions that may arise with opening a small business, and I will address a few of those questions briefly in the following list of questions one may ask while brainstorming.

What type of business do you want to open? There are various business endeavors an entrepreneur could involve themselves in. It all comes down to what knowledge one has, or is willing to obtain. Are you a restaurateur? Repairman? Plumber? Home health / assistance? Do you have experience managing or working at such establishments? Do you need formal education from an institution? Will you work as a sole proprietor, or a partner / member? Research limited liability corporations (LLCs) in addition to sole proprietorships and partnerships. S corporations are another option, but they are for business with stockholders, and may not be right for your particular business application.

What kinds of licensing and/or permits are required? Each business will have different licensing requirements; it all comes down to what the entrepreneur ultimately chooses to do. A restaurant would need food safety licensing in addition to basic business licensing, and if alcohol is on the menu – there is another permit the entrepreneur would need to legally sell alcohol on the premises. Repair oriented businesses would need at least the business license to repair, but if they sell parts as well, they would need to have “retail” listed on their business license in addition to “repair”. Health care services require at least formal education and licensing as an LPN, RN, or one of several other health care related licenses. Be sure to check your state’s laws to ensure what is necessary to operate your type of business.

What training / education / certifications are required to legally run this business? We touched upon this in licensing / permits, however there is much more involved than the required licensing. For example, one cannot operate a vehicle collision repair business without the knowledge of performing those types of repairs. There are schools that can be attended to learn what must be learned to effectively operate nearly any kind of business. However, there are also businesses where experience is enough to operate effectively without needing any formal education (lawn care, house cleaning just to name a couple). Also, there are certifications for training in nearly, if not all, care industries.

Does this business require a storefront? Retail establishments will undoubtedly need a storefront. Bear in mind, retail business will have a much larger initial investment than a service based operation. That initial investment is inventory. Some service businesses may not need a storefront to operate, as much of the service performed could very well be on-site. If a storefront is necessary, be sure to consider delivery or on-site service if it is feasible for your operation.

How much will it cost? This number will vary wildly based on the type and size of business you are planning. For smaller businesses, this number could be as low as $200 for a license and/or permit, or as high as a million dollars or more. Obviously, inventory is very expensive, and so are specialized tools for performing extremely precise work. Calculate the expected opening and operating expenses. Determine what size storefront is needed (if applicable), and research local commercial realty properties, locations, and prices. It is absolutely cheaper to rent in the short-term, although the thought of owning property that is paid off is very tempting. Prices on most things will vary based on your location. Employees are another cost, if your business warrants employees. When employees come into the equation as opposed to sole proprietors or partnerships, one must add extra insurance for the business (unemployment insurance comes to mind). Check with your selected insurance company for which types of additional coverage are required, and if offering health insurance can be done reasonably. Those employees will also need to have taxes paid on their wages – part from the employee’s paycheck and part from the company. Another potential cost is repayment of loans, if you don’t already have the capital needed to open your business. Basic operating expenses are not to be forgotten, as heating/cooling, Internet connectivity, and utilities will be regular expenditures for any storefront. On-site service operations cost very little when compared to a physical storefront.

How can an individual pay for this? If you do not have the funds available, which is very common, applying for loans is a way to attain funding. Be sure to have a business plan with projected expenses and revenues. There are other ways to gain funds for a business. Look into grants. While they are not very common, they are a potential source for assistance nonetheless. If many people believe in your dream, one could possibly acquire donations from those individuals.

What about accounting? Bookkeeping is a necessity – research which accounting/bookkeeping software would work best for the type of business you are planning. Point-of-sale (POS) systems are needed for “ringing up” and selling inventory or goods to the customer. POS systems keep track of sales, sales taxes, employee labor dollars spent, and many other items. If you are apt at creating spreadsheets, you may be able to keep track of your own inventory depending on your particular business model.

I hope this brief listing of questions and potential answers has been of assistance to aspiring entrepreneurs. Although there are countless successful entrepreneurs who have little or no formal education in business, it is never a bad idea to research courses regarding administration and management. Be sure to take a look at the Small Business Administration’s website at http://www.SBA.gov for more helpful information.

The author, Johnathan Baker, is an educated entrepreneur, with over ten years of experience in small business administration and management. Opening any type of business is no simple task, as many things must be considered. With experience opening, operating, and managing small businesses, the author aims to help aspiring entrepreneurs in realizing their dreams. While the questions are not all inclusive, they are, at the very least, a good bit of information to consider throughout the beginning processes of opening a small business. Take the information provided and begin or continue working on your business plan on the road to entrepreneurship.

Posted in homepage | Comments Off on Brainstorming To Start A Small Business – Questions To Answer

The Importance of Automotive Filter Changes

Humans require clean, easy-to-breath air in order to live. And just like humans, vehicles also need to be able to “breathe” clean air in order to survive. While human lungs make it possible to breathe, a vehicle’s air filters do just the same. But after some time, they begin to accumulate mass amounts of dirt, debris, and other airborne particles, which eventually decreases their quality and function. For this reason, it is critical to have your vehicle’s engine and cabin air filters inspected and changed on a routine basis to promote safe and efficient driving. Continue reading to learn more about the importance of routine automotive filter changes.

Air Filters

Keep in mind that your car’s air filters are your first line of defense against irritating and obstructive airborne contaminants. Dirt, dust, pollen, mold spores, exhaust gases, bacteria, and more are examples of airborne contaminants that have the ability to negatively affect the quality and performance of your engine and vehicle as a whole. And according to Community Car Care, there is a 1 in 5 chance that YOUR car needs an air filter change right now! Many drivers are guilty of overlooking this small but highly-necessary scheduled maintenance.

Engine Damage

The long list of airborne contaminants can have a powerful impact on your vehicle’s engine, and in a very negative way. Everything from pistons, cylinders, and cylinder walls, to piston rings and bearings, are just a few areas of a car engine that can begin to lose performance value from clogged or dirty air filters. Over time, neglecting to change them can lead to serious engine malfunctions and breakdowns, which means frustrating, costly repairs.

Cabin Filters

If you like to have clean, breathable interior air that smells good, you need to change your air filters on a routine basis. Once they start to become clogged, they begin to slowly lose their ability to do their job. So once they are entirely clogged, you can suffer some mild but irritating consequences, such as musty smells, sore throat, coughing, itchy eyes, tightening of the chest, and more. Changing them regularly keeps the interior environment of your car fresh and easy to breath.

Schedule

Refer to your vehicle’s owners’ manual for the manufacturer recommendations on factory scheduled maintenance. The general rule of thumb is to have your air filters inspected and changed every time you take your car in for an oil change. In fact, it is often a part of oil change packages. This should be every 3,000 miles or so. Talk to your mechanic for professional advice.

Posted in homepage | Comments Off on The Importance of Automotive Filter Changes

Let Your Car Breathe Freely With Routine Air Filter Replacement

In a similar way to living creatures, vehicles also need to be able to freely “breathe” clean air. Of course cars do not have lungs, so when we say “breathe”, what we really mean is “filter air.” Your vehicle’s cabin air filters should be inspected and serviced on a routine basis to ensure perfectly clean and unobstructed “breathing.” For permanent filters, a professional car mechanic will clean them, dry them, and replace them as needed. For disposable ones. A simple inspection and replacement is all it takes! Continue reading to learn more about the importance of clean automotive air filters.

Defense Against Airborne Contaminants

Your vehicle’s air filters play an important role in terms of interior cabin air quality and comfort. But it also plays a significant role in how your vehicle operates. Clogged or defective filters can cause a decrease in engine performance and capacity, as well as, lose their ability to protect you against harmful airborne contaminants. You see, dirt, oil, and other harmful contaminants are trapped in air filters, and after sometime, they accumulate to mass amounts, causing the filters to lose their value. And when the filters become too saturated, they cannot trap anymore contaminants. As a result, these contaminants enter the engine and damage pistons, piston rings and bearings, cylinders, cylinder walls, and more. This causes the engine to then lose power. For fuel injected cars, air filters protect the air flow sensor from contamination.

As for interior air quality and comfort, dirty filterings can jeopardize the cabin environment. Without anything between you and airborne contaminants, you are left to suffer from dirty indoor air. This results in musty odors, stuffiness, allergy-agitation, and more. When it comes to cabin air filters, try to have them inspected and replaced every 12,000 to 15,000 miles. If you are a frequent driver or frequently drive long distances, decrease this rule to every 10,000 to 12,000 miles.

Although such an important part of car safety and maintenance, air filter replacement is often overlooked. Be sure to talk to your trusted car mechanic about recommended factory scheduled maintenance for your vehicle. They have the knowledge and advanced diagnostic systems to provide accurate and effective service for your exact make and model car or truck. They can then provide you with a trusted schedule that you can continue to use and refer to for years to come!

Call Main Street Auto Tech at 317-881-7220 for car filter replacement in Greenwood, Indiana. They are ASE certified car mechanics that offer a wide range of automotive services for all make and model vehicles, domestic or foreign. Ask them about their auto repair coupons and discounts too! Call 317-881-7220 to request a free estimate for Greenwood car maintenance, today.

Posted in homepage | Comments Off on Let Your Car Breathe Freely With Routine Air Filter Replacement

What Is Computer Aided Engineering And Computational Fluid Dynamics?

Computer Aided Engineering (CAE)

CAE is the broad use of computer software with the aim to aid engineering tasks. It is a broad field that involves computational fluid dynamics, finite element analysis, optimization and multibody dynamics. Software tools developed to support the activities are known as CAE tools and they can be used in different application, including analyzing robustness and also performance of assemblies and components.

Computer aided design has indeed revolutionized modern engineering as it allows easier development of products and management integration of the same. It has also made modeling greater and offers basis for virtual networking. In the engineering world, the design is used widely to develop products to meet consumer expectations. It is this knowledge that makes engineering students and professionals important because of the benefits they bring to the engineering workforce.

Using computer aided engineering designs can be simulated in all kinds of scenarios without any physical change to the model. The technology is therefore widely applied to engineering applications. It comes with drawing benefits, project management benefits and networking benefits as well. It is applied to fields like aviation, space, shipbuilding and automotive industries. Computer aided engineering systems are supportive to businesses because they can place information views into the business process and make reference architectures useful especially when it comes to manufacturing models and products.

Computational fluid dynamics (CFD)

This is a discipline that falls under computer aided engineering and is used to engineer products and process designs as well as fabricate and analyze all elements involved in the processes. The technology also falls under fluid mechanics that rely on numerical methods and algorithms to analyze and solve problems that are related to fluid flow as well as heat transfer. Computational fluid dynamics are made up of three phases:

· Pre-processing that defined computation fluid dynamics models that include physics environmental factors, geometry and boundary conditions

· Analysis which offer solution of transport equation using the computational fluid techniques

· Post processing which involves results using visualization tools

CFD started way back in the 1960s with the first successes becoming prominent in 1970s. In services industry it took effect in the 1980s and the industry significantly expanded in the 90s. CFD packages continue to develop and significant changes are definitely expected in the future. The knowledge on how fluid flow and the quantitative effects of solids that are in contact helps:

· Architects and building service engineers to provide safe and comfortable human environments

· Power plant designer to achieve maximum efficiency and also reduce pollutant releases

· Chemical engineers in maximizing yields from processing equipment and reactors

· Designers of marine, air and land vehicles to achieve maximum performance at minimum costs

· Safety engineers and risk-and-hazard analysts to make predictions of the damage extent of structures, human beings, vegetation, animals and even equipment as a result of blast waves, explosions and fires

The flow simulation also proves helpful to the metropolitan authorities in determining pollutant emissions, meteorologists in foretelling water and wind current, petroleum engineers in designing oil recovery strategies among many other applications.

Posted in homepage | Comments Off on What Is Computer Aided Engineering And Computational Fluid Dynamics?

Cellular Or Mobile Phones: How Are They Affecting Children And Us?

I am sure you are using one of them, like almost everyone else doe’s including me. As you become aware about some things, most likely you will be making changes the way you use a cellular phone from the information and awareness you be reading about.

There are as many as over 7 billion mobile phone subscriptions worldwide. Continued research to clarify any health risks coming from cell or mobile phones is ongoing. The first thing to come to mind is electronic radiation such as changes to sleep patterns and brain activity. Lots of evidence demonstrates that radiation from cell phones is a real danger.

Many different researches over years have confirmed that long-term exposure to cell phone radiation is a significant risk to health. Such findings of course are strongly denied by the other side of that argument, depending on which side of the argument you listen to. Debates like this have been ongoing for years and most likely will never be settled. After all, why would designers and manufacturers admit to any danger coming from phone usage? This would certainly kill the goose that lays the golden eggs!

The international agency for research, which is part of the world health organization released a statement over five years ago and declared cell phones a class B Carcinogen.

Long Term Exposure: How Long Is Too Long?

Whatever the brand name, I Phone, blackberry, android, tablets, Smartphone’s or just a basic flip phone has revolutionized communication in the 21st century. Some people spend as much as 2 ½ hours or more on the phone daily. Because cell phones are providing an efficient and easy way to communicate, but at the same time this can also take a toll on health.

The possible effect of a long-term heavy use of any mobile phone and the length of each call matters. The amounts of time people use cell phones are important factors which enhance the health related risk. The amount of radio frequency energy from a mobile phone use being released depends on different factors, such as distance from face and ear, the type of phone used, and the distance between cell phone towers.

What these findings are telling us: Make your conversation on a cell phone as short as possible or better still use a hand free device which places more distance between your head and the phone. Turn off the phone when not in use. Use the speaker phone when possible. Keep your phone away from your body as much as you can. Never use your phone while driving or even worse texting; this puts you and others in a potentially dangerous situation.

Children Are More Vulnerable

Children have the potential being at greater risk and affected in different ways. The brain of a child is not fully developed until the age of around 20. This makes any exposure to electronic radiation and radio frequency more dangerous for children than for adults. The other issue which affects a big percentage of children as well as teenagers is eye vision. Looking at mobile screens, what is it doing to kids’ eyes? Almost at any age children love playing with smart phones but what are the long-term effects?

Unfortunately some people are using such gadgets as baby sitters for the children without being aware of the damage it does. Children like to watch things close up on screen which is contributing to spike in becoming short-sighted. Studies have shown there is an alarming increase that affects many children between 10 and 12 years old and the amount has doubled over the last decade. The fact is: The more kids watch things close up on screen, the more they put their eyes in danger.

It is most common for children to develop myopia which gives a blurry long-distance vision. Myopia can also increase the risk of other eye problems in adulthood as well, including cataracts and blindness. However, most of the myopia cases are as young as six and 15 to 18, of course genetics play a role in severity in this.

As a guide, reduce screen time to as little of 2 hours per day from 2 to 5 year olds. There should only be a small increase of time allowed for older ones. Actually in Taiwan, if a child under the age of 2 has been found with a tablet or playing with any cell phone the parents will get a heavy fine.

Children who spent more time outdoors in fresh air and sunshine have a far lower rate of myopia. Limit the screen time, encourage kids to spend more “green time” hours in nature outdoors for better health. Make sure to include a colorful veggie diet from leafy greens which contain lutein, this is known to help eye sight and vision.

In General Common Sense Applies

A cell or mobile phone for most people has been one of the most revolutionary developments in time. It is a great communication tool being able to carry it with you wherever you go. It is a good security and emergency device that can save lives. So, what is wrong with all of those gadgets?

Could it be just the one who is using it creating that problem?

There are too many people going to the extreme and don’t know what is any longer normal or reasonable. That also applies to our food intake, beverages, including alcohol, and tobacco etc. All of those are not, or less harmful if used in moderation. If only used for short time this also can apply to cellar or mobile phones, and can reduce the risk factor as much as eighty percent.

Posted in homepage | Comments Off on Cellular Or Mobile Phones: How Are They Affecting Children And Us?

Different Uses of Graphite

Graphite felt is available in several thicknesses and widths to match the specific application. It is most commonly used as an insulating material, such as cladding, heat shields, or filters. Most of the felt is low density to help improve performance by letting a furnace or similar object heat and cool at a quicker rate. This low density also helps to control and stabilize the temperature to create the atmosphere that is more constant and maintains the more productive heat all the way through.

The felt can have an extra coating which is useful to give more protection against erosion. Graphite felt is made to be easy to cut to size and install in place. Plus, there is a rigid form of this material and created in a variety of shapes, such as rings, cylinders and baffles.

Here are a few of the popular uses of graphite:

Ceramics industry

The use of graphite is common in the ceramics industry to help increase performance while the furnaces are working at high temperatures, as well as giving greater mechanical strength and electrical conductivity.

Automotive industry

Graphite is the preferred material to use in place of asbestos in the automotive industry and can feature in a variety of areas, such as the brake lining and gaskets. Plus, it is a major aspect of brushes used in the electric motors.

Defense Technology

Graphite is a practical choice for a wide range of military aerospace vehicles because of the ability to endure high temperature ranges. Also, this material is a useful choice for space shuttles and applied as surface tiles. The material is very stable with high resistance properties, and can endure temperatures that reach up to 3000 degrees C.

Electronics industry

The use of an ultra-pure form of graphite is becoming more popular in electrical circuitry and components because of the increasing reliance on computers. Also, the graphite is a favored choice for electrical circuits and systems that rely on automation.

In addition to graphite, there is also a carbon fiber felt which is a similar type of material and useful in applications that need high temperature insulation, such as furnaces. This material also has high heat properties even with thin layers to provide the reliable and long-term insulation results. Plus, this material is able to avoid contracting or shrinking to help maintain the consistent heat and avoid issues with hot sports or cavities.

Posted in homepage | Comments Off on Different Uses of Graphite

The “How” And “Why” Of Electric Panels

Electric panel very simply refers to the electric board which provides electricity to the sub circuits. These panels are extensively used in Process industries, Automotive industries, Food and Beverage sector, Oil and Gas Equipment, Aerospace, Metal Forming Machinery, Machine Tools, Power Generation, R&D Testing labs and Process Industries and other industrial sectors.

Are You Banking On The Right Product?

Once you go through this post, you will actually understand why electric panels play such an important role in the aforementioned sectors. Think about the times when you experience power outage owing to a natural disaster— then you must have run to the electric panel to restore power. When it comes to electric panels, getting the right circuit breaker can make all the difference between safety and risk. These panels are generally based in backrooms, basements and less visited areas of a particular place.

The products of reputed manufacturers are known for the following aspects:

– Quality performance

– Easy installation

– Flawless design

– Power efficiency

– Low maintenance

Make sure you are checking the credentials of the manufacturer thoroughly before you are roping the same in. If you’re looking forward to install these units, you should find out about the manufacturers who are known for offering products with the aforementioned qualities.

The internet will offer you information about a lot of manufacturers providing these panels. However, one should realize that that not all of them are equally credentialed to offer you quality panels. It takes years of experience and domain expertise to manufacture panels that go on to serve you satisfactorily in the long term.

So, it is important to ensure that you’re actually taking the trouble to conduct proper market survey and then going on to settle for their product. Now, the question is – how exactly would you know that you are actually posing your faith in the right name? You can consider the following steps.

How To Settle For The Right Electric Panel

The first thing to do would be to seek recommendations from peers. Now, let us clarify from the very beginning that in order to meet the diverse quality requirements, leading manufacturers employ quality analysts who ensure that the products pass multiple quality stages before reaching you. Those who have accessed products of these manufacturers are bound to endorse their products- while those who have actually gone on to choose manufacturers arbitrarily might not as well be in a position to do so. When you are not conducting research on the background of the manufacturer, you are not even aware of whether or not the particular name is actually taking the aforementioned steps to ensure that only quality products are reaching you. Without research there is every chance of unwittingly ending up with poor quality products.

Read reviews in order to find out how the companies have been rated. Kindly ensure that you’re not leaving any stone unturned to get the best value for your money. Taking the aforementioned steps will ensure that you are not repenting your choice later on.

Posted in homepage | Comments Off on The “How” And “Why” Of Electric Panels

How to Live a More Exciting Life With Network Marketing

If you are a network marketing professional then you have the ability to live an amazingly exciting life. In this article, we are going to talk about how to live a more exciting life with network marketing.

When you are working in network marketing you have the ability to be working from anywhere in the world now that we have the internet. There is no reason to be constrained to one area of the world. We can go anywhere in the world and still support our teams and show people how to be successful in our organizations.

If we don’t design it is not going to happen. If you do not know where you want to go, what you want to do and how you want to do it, it’s not going to happen. This is why we need to create dream lines. We need to know what we are going to fill our free time with once we create it. If we don’t know what we are going to do with the free time, we will find something to fill it.

The biggest trap is getting addicted to working for work’s sake. Instead of working for work’s safe we need to create systems that will work for us and fill our time with things we enjoy doing. What are some hobbies that you have? What are some causes you want to help with?

Network marketing allows us to live any lifestyle that we want to live and create passive, residual income but we have to tell life what we want. It is not enough just to have a dream board. You have to have a game plan.

Posted in homepage | Comments Off on How to Live a More Exciting Life With Network Marketing